Linear sikring / Grøftesikring utleie

Utleie Grøftekassetter og Linear sikring.

Beskrivelse/spesifikasjoner

Bilde av Linear sikring / Grøftesikring utleie

Ring 72 88 44 60 for pris

Vær den første til å anmelde dette produktet

Se brosjyre her !

Brosjyre fra Produsent.

Vi har corner post system :

5 meter lengde x 5 meter bredde x 6 meter dybde på lager.

6 meter lengde x 5 meter bredde x 5 meter dybde på lager.

4,75 meter lengde x 4 meter bredde x 3,8 meter dybde på lager.

10 meter lengde x 5 meter bredde x 5 meter dybde 2 stk på lager.

Vi leier ut grøftekasser alle størrelser og Linear sikring for større prosjekt.
Daglig har vi mange kasser på lager klar for utleie. standard mål 3,50/4,00 m lengde og 2,40 meter høyde med mange varianter av mellomstag opp til innvendig bredder på 5 meter.

Spør oss om dagsleie eller månedsleie!

Linear sikring
Linear sikring for spesielle prosjekter.. meget prisgunstig og enkelt å bruk!
Spar MYE penger og MYE tid på å bruke linear sikring istedenfor masse fjerning eller spunting!
Enkelt byggesett som effektiviserer arbeidstiden!!
Vi stiller med opplæring og støtte.

GLOBALLY UNIQUE, PATENTED METHOD.

With E+S linear shoring, rigid boogie cars keep the soldiers and thus the shoring panels at an equal distance. Every-thing stays linearly aligned, always at the same distance from the opposite side, ensuring more effective, faster, and noticeably more cost-effective operations.

A major advantage of the system is derived from the special design of the soldiers, as it allows the shoring panels to be pivoted in from the side.

Our innovative trench end shoring boogie car can handle both the compressive forces exerted from the long sides of the trench shoring and the pressure from the front, which means the sheet piles can now lean directly against the boogie car and the pressure is transferred to the shoring.

The E+S linear shoring system can be used as formwork for in-situ concrete and installed with low vibrations, minimizing the impact on the surrounding soil. Existing buildings and traffic flow thus remain largely unimpaired.

ADVANTAGES

Low-vibration installation
Very little impact on the ground outside the shoring
No impairment of buildings or traffic flow
Flexible pipe culvert heights, plenty of working space
Large widths and depths realizable
Suitable as formwork for cast-in-situ concrete
Highly suitable for manholes
“Open” guidance of the panels prevents them from being jammed with soil
Shoring panels can be pivoted in from outside

E+S SINGLE-RAIL LINEAR SHORING.

Shoring depths up to 4.00 m.

With the linear system, the shoring panels are installed at depths of up to four meters. For inner-city areas, a particularly low-vibration installation method is chosen so that the impact on the ground is minimized.

E+S STEPPED LINEAR SHORING.

Shoring depths from 5.00 - 9.00 m.

In the stepped system, the shoring panels are held in vertically installed rails so that they can slide past each other. When installed, this results in a stepped shoring system.

E+S DEEP LINEAR SHORING.

Shoring depth up to 12.00 m.

Deep linear shoring, in which two shoring units are coupled together, combines the advantages of the linear shoring system into a high-performance functional principle.

E+S HEAD SHORING AND EXTERNAL BELT ATTACHMENT.

Head shoring with sheet piles is particularly recommended for press pits. Trench sheeting and sheet piles are used here as an alternative to pre-head shoring with large-area panels.

Beskrivelse
Kontakt oss om produktet